aluminium alloys

Alloy	Cu	Si	Mg	Zn	Fe	Mn	Cr	Ni	Sn	Pb	Ti	Al
ADC1	1.0 max	11.0 to 13.0	0.3 max	0.5 max	1.3 max	0.3 max		0.5 max	0.1 max	0.20 max	0.30 max	Balance
ADC3	0.6 max	9.0 to 11.0	0.4 to 0.6	0.5 max	1.3 max	0.3 max		0.5 max	0.1 max	0.15 max	0.30 max	Balance
ADC5	0.2 max	0.3 max	4.0 to 8.5	0.1 max	1.8 max	0.3 max		0.1 max	0.1 max	0.1 max	0.20 max	Balance
ADC6	0.1 max	1.0 max	2.5 to 4.0	0.4 max	0.8 max	0.4 to 0.6		0.1 max	0.1 max	0.1 max	0.20 max	Balance
ADC10	2.0 to 4.0	7.5 to 9.5	0.3 max	1.0 max	1.3 max	0.5 max		0.5 max	0.2 max	0.20 max	0.30 max	Balance
ADC10Z	2.0 to 4.0	7.5 to 9.5	0.3 max	3.0 max	1.3 max	0.5 max		0.5 max	0.2 max	0.20 max	0.30 max	Balance
ADC12	1.5 to 3.5	9.6 to 12.0	0.3 max	1.0 max	1.3 max	0.5 max		0.5 max	0.2 max	0.20 max	0.30 max	Balance
ADC12Z	1.5 to 3.5	9.6 to 12.0	0.3 max	3.0 max	1.3 max	0.5 max		0.5 max	0.2 max	0.20 max	0.30 max	Balance
ADC14	4.0 to 5.0	16.0 to 18.0	0.45 to 0.65	1.5 max	1.3 max	0.5 max		0.3 max	0.3 max	0.20 max	0.30 max	Balance
AC4B	2.0 to 4.0	7.0 to 10.0	0.5 max	1.0 max	0.8 max	0.5 max	0.20 max	0.35 max	0.10 max	0.20 max	0.20 max	Balance
AC2B	2.0 to 4.0	5.0 to 7.0	0.5 max	1.0 max	0.8 max	0.5 max	0.20 max	0.35 max	0.10 max	0.20 max	0.20 max	Balance
AlSi9Mg	0.03 max	9.0 to 10.0	0.30 to 0.45	0.07 max	0.15 max	0.10 max					0.15 max	Balance
AlSi10Mg	0.08 max	9.0 to 11.0	0.25 to 0.45	0.10 max	0.45 max	0.45 max		0.05 max	0.05 max	0.05 max	0.15 max	Balance
AlSi9Cu1Mg	0.8 to 1.3	8.3 to 9.7	0.30 to 0.65	0.80 max	0.7 max	0.15 to 0.55		0.20 max	0.10 max	0.10 max	0.10 to 0.18	Balance
AlSi9Cu3(Fe)	2.0 to 4.0	8.0 to 11.0	0.05 to 0.55	3.0 max	1.3 max	0.55 max	0.15 max	0.55 max	0.25 max	0.35 max	0.25 max	Balance
AlSi12Cu1(Fe)	0.7 to 1.2	10.5 to 13.5	0.35 max	0.55 max	1.3 max	0.55 max	0.10 max	0.30 max	0.10 max	0.20 max	0.20 max	Balance

Alloy	Cu	Si	Mg	Zn	Fe	Mn	Cr	Ni	Sn	Pb	Ti	Al
LM6	0.1 max	10.0 to 13.0	0.1 max	0.1 max	0.1 max	0.5 max		0.1 max	0.05 max	0.1 max	0.20 max	Balance
LM10	0.1 max	0.25 max	9.5 to 11.0	0.1 max	0.35 max	0.1 max		0.1 max	0.05 max	0.05 max	0.20 max	Balance
LM4	2.0 to 4.0	4.0 to 6.0	0.15 max	0.5 max	0.80 max	0.20 to 0.60		0.3 max	0.1 max	0.1 max	0.20 max	Balance
LM24	3.0 to 4.0	7.5 to 9.5	0.30 max	3.0 max	1.30 max	0.5 max		0.4 max	0.20 max	0.3 max	0.20 max	Balance
LM-26	2.0 to 4.0	8.5 to 10.5	0.5 to 1.5 max	1.0 max	1.20 max	0.5 max		1.0 max	0.10 max	0.20 max	0.20 max	Balance
LM13	0.70 to 1.50	10.2 to 12.0	0.8 to 1.5 max	0.5 max	1.0 max	0.5 max		1.5 max	0.1 max	0.1 max	0.20 max	Balance
LM2	0.70 to 2.50	9.0 to 11.5	0.30 max	1.2 max	1.0 max	0.5 max		0.5 max	0.20 max	0.3 max	0.20 max	Balance
LM25	0.1 max	6.5 to 7.5	0.20 to 0.45	0.1 max	0.5 max	0.3 max		0.1 max	0.05 max	0.1 max	0.20 max	Balance

Aluminum alloy (or aluminum compounds; see spelling contrasts) are composites in which aluminum (Al) is the overwhelming metal. The typical alloying components are copper, magnesium, manganese, silicon, tin and zinc.. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for wrought products, for example rolled plate, foils and extrusions. Cast aluminium alloys yield cost-effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys . The most significant cast aluminum composite framework is Al–Si, where the abnormal amounts of silicon (4.0–13%) add to give great throwing qualities. Aluminum compounds are broadly utilized in designing structures and segments where light weight or consumption obstruction is required.

Wrought Alloys : Any Alloys that are turned into consumer products by solid state process – extrusion , forging and rolling.